Splice Protectors 40mm HSFP-40T 1mm Pin

These heat shrinkable fibre optic splice protectors requires a temperature of 110 ℃ for 1 minute for shrinking and an additional 30 seconds for cooling down time before inserting the splice into a tray to allow the meltable adhesive to set.
Splice Protectors 40mm HSFP-40T 1mm Pin.
Sold in packets of 100.

Specifications

Operating Temperature: -45℃ to 125℃
Tensile strength: >10.3 MPa
Elongation at break: > 500%
Longitudinal shrinkage: <5%
Eccentricity: < 30%
Dielectric strength: >25KV/mm
Volume resistance: > 1015Ω·cm
Copper stability: Non-Corrosive
Water absorption: < 0.10%

For more in-depth information, zoom in on picture of data sheet.